RESET THE EDG ROOM FIRE FLAPS
1. Ensure that the fire is out and that the proper command authority has authorized entry into the space.
2. After the space has been ventilated, and the appropriate damage control measures have been completed,
the EDG room fire flaps (figure 22, items 3 and 4) may be reset.
3. Reset the EDG room fire flaps (figure 22, items 3 and 4) by pulling up from the bottom. The sections for the
EDG room fire flap should fold up like a fan (figure 23) as they are raised. Once the EDG room fire flaps are
fully raised, they will latch into place.
Figure 23. Resetting the EDG Room Fire Flaps
END OF WORK PACKAGE