Quantcast FIRE STATION OPERATION

 

Click here to make tpub.com your Home Page

Page Title: FIRE STATION OPERATION
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
PRESSURIZE FIRE MAIN
Up
TM-55-1925-292-14-P Firefighting Fire Alarm and Fire Suppression Systems Inland and Coastal Large TUG (LT) Manual
Next
FIRE STATION SHUTDOWN
TM 55-1925-292-14&P
0005 00
FIRE STATION OPERATION
1. Perform the Pressurize the Fire Main procedure in this work package.
2. Ensure that the fire hose (figure 14, item 1) is connected to the fire station cutoff valve (figure 14, item 2).
2
4
3
1
Figure 14. Fire Station
3. Remove the fire hose (figure 14, item 1) from the hose storage rack (figure 14, item 3).
4. Lay the hose (figure 14, item 1) out and extend it to its full length.
5. Verify that the nozzle valve (figure 14, item 4) is CLOSED.
6. Slowly OPEN the fire station cutoff valve (figure 14, item 2) and pressurize the fire hose.
7. Firmly grasp the fire hose nozzle (figure 14, item 4) and direct it at the base of the fire.
WARNING
When operating a pressurized fire hose, hold the nozzle with a firm grip. If not
held firmly, the nozzle will thrash about and may cause serious injury or death to
personnel.
8. Slowly OPEN the nozzle valve (figure 14, item 4) and direct the water stream at the base of the fire.
0005 00-15

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.