TEST OR INSPECTION
Step 10 will check if pump house wire harness is receiving power. If passenger side pump
house work light operates, Step 10 and Step 11 will assist in determining where power is
lost to driver side work lights.
Open passenger side pump house remote oil filter access door (WP 0010). Check if
passenger side pump house work light operates.
If passenger side pump house work light does not operate, go to Step 14.
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Put pump operator's panel PANEL LIGHTS switch to OFF position (WP 0004). Turn
battery disconnect switch to OFF position (WP 0007). Remove lamp from driver side
pump house work light (WP 0335). Check for continuity across lamp.
If there is no continuity, replace lamp (WP 0335).