TEST OR INSPECTION
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle. Jewelry can catch on equipment and cause serious injury. Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Open pump operator's panel housing (WP 0325). Turn battery disconnect switch to ON
position (WP 0007). Check for 22 to 28 VDC between pump operator's panel wire
harness wire 4070 (white) at pump operator's panel wire harness START PUMP
ENGINE STOP switch, terminal and a known good ground.
If 22 to 28 VDC are not present, go to Step 12.