6-78. LADDER ASSEMBLY - Continued
(4) PulI electrical cables (8, 9 and 10) through tension slings. Remove grommets and pull electrical
cables through lower mid-section.
(5) Attach a hoist at the mid-point of the lower mid-section and slide it out away from the base mid-
(6) At front of base mid-section, loosen jam nuts (12) and back out adjusting screws (13) for wear pads
(14). Remove two bolts (15), lockwashers (16), and flatwashers (16A). Remove and discard vertical
wear pads (14). Horizontal wear pads (14A) may be lifted out.