6-51. TORQUE CONVERTER HOUSING - Continued
Install new seals and gaskets when assembling unit.
Keep seal rings sealed in package until ready to use to keep
from being damaged.
Roll seal ring (1) to one-half length and hold for at least 10 seconds.
Install seal ring (1) in lower groove of support hub (2).
Roll seal ring (1) to one-half length and hold for 10 seconds.
Install seal ring (1) in upper groove of support hub (2).
Turn housing over using two people.
Install bearing race (3), roller bearing (4), and bearing race (5) on inner bore (6).