5-42. REAR TANDUM AXLE AND DIFFERENTIAL - Continued
Reverse drive pinion (1) in press to place gear end up. Press spigot bearing (35) on shaft ofgear
spigot. Bearing (35) must be flat against face of gear.
Install retaining ring (30) in groove in end of shaft to secure spigot bearing.
Apply axle lubricant to bearing cups (33 and 34) in bearing cage (28) and to bearing cones and
bearing on pinion.
Install spacer (26) of same thickness as was removed at disassembly.
Install assembled drive pinion (18) in bearing cage (28). Install outer bearing cone (32) in bearing