|
| |
TM 5-4210-233-14&P-1
5-31. RADIATOR - Continued
(12)
Be sure radiator drain cock is closed.
Fill radiator with approximately 14.5
gallons (55 liters) of coolant. Use a
50/50 mix of water and ethylene-
glycol (Item 29, Appendix E). Install
radiator cap.
(13)
Carefully lower radiator shroud into
truck.
(14)
Install two hex head capscrews (21)
with
lockwashers
(22)
and
flat
washers (23) on passenger side of
radiator shroud.
(15)
Install two hex head screws (24) with
flat washers (25), lockwashers (26)
and nuts (27) on driver's side of
radiator shroud.
(16)
Install upper panel (28) with nine
panhead
screws
(29)
and
nylon
washers (30).
(17)
Install two hex head screws (31) with
lock- washers (32) and flat washers
(33) from inside of radiator shroud.
(18)
Install six panhead screws (34) with
lock- washers (35) and flatwashers
(36) at front edge of radiator shroud.
c.
Follow-on Maintenance.
(1)
Install fan (see para 4-132).
(2)
Install cab roof panel (see para 4-76).
(3)
Connect batteries (see para 4-114).
(4)
Start engine and check for leaks. Correct as required.
(5)
Install engine enclosure (see para 4-127).
5-194
|
