5-11. ENGINE ASSEMBLY - Continued
(37) Remove two nuts (50), plates (51), washers (52) and bolts (53). Remove and discard two rubber
biscuits (54) from frame cross member.
(38) Remove twenty-four bolts (55) and lockwashers (56) securing transmission to engine.
Keep out from under engine when removing from vehicle. If
engine slips, sways, or falls, serious injury or death may result.
Make sure loose hoses and wires are secure and moved out
of way so they do not snag and cause damage when engine
Before lifting engine completely out of vehicle, test by lifting
slightly to see if balanced. If engine starts to tilt, lower and
adjust chain lengths. Unbalanced engine may swing causing
(39) Carefully lift engine up and out of truck through roof panel opening.
(40) Mount engine on overhaul stand.