Table 2-1. Operator PMCS Procedures -Continued
Equipment Is Not
ITEM TO BE INSPECTED/Procedures
ENGINE AND ACCESSORIES
Air Cleaner Assembly
Check for looseness or open latches. Inspect flexible
duct for cracks or torn.
Oil Cooler, Filter
Check for looseness or leaks. Report any leaks to
Fuel Fllter and Piping
Check for leaks or visible damage. Report any
- Fuel is leaking.
deficiencies to Unit Maintenance.
Radiator, Hoses, and Piping
When the engine is hot, the coolant can
cause serious burns. To prevent injury,
allow engine to cool before carrying out
the following inspection.
Inspect radiator for leaks, secure mounting and
- Radiator is leaking or
physical damage. RePport any deficiencies to Unit
Examine ail hoses and air lines for signs of leakage,
- Any hose is leaking or
cuts, or abrasions. Report any deficiencies to Unit
has serious cuts or
Check cables for chafing and/or loose insulation.
- Starter motor will not
Follow cables from battery boxes through to starter
Check all connections for tightness and corrosion.
Report any deficiencies to Unit Maintenance.