Quantcast PRESSURE RELIEF VALVE (PUMP DE-STROKE) - TM-5-4210-233-14P-1_614

Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: PRESSURE RELIEF VALVE (PUMP DE-STROKE)
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
OUTRIGGER CONTROL VALVES - TM-5-4210-233-14P-1_613
Up
TM-5-4210-233-14P-1 Twin Agent 4x4 Firefighting Truck Model No. CM-KFT-B Manual
Next
Follow-on Maintenance - TM-5-4210-233-14P-1_615
TM 5-4210-233-14&P-1 4-191.  PRESSURE RELIEF VALVE (PUMP DE-STROKE) THIS TASK COVERS: a. Valve Cartridge Replacement  d. Follow-on Maintenance b. Solenoid Replacement c. Valve Block Replacement TOOLS REQUIRED EQUIPMENT CONDITION Tool Kit, General Mechanics, Automotive Main Engine Shutdown (see para 2-12.) (Appendix B, Section 1IJ, Item 1) APU Shutdown (see para 2-16.) Batteries Disconnected (see para 4-114.) MATERIALS/PARTS REQUIRED Pull-out Treadplate Pulled Out (Driver's Side) Tags (Item 32, Appendix E) Hydraulic Oil (Item 28, Appendix E) Caps, Shipping and Sealing (Item 39, Appendix E) O-ring (Figure 198, Appendix F) a. Valve Cartridge Replacement. To replace valve cartridge (1), unscrew cartridge from valve block (2). Remove and discard O-ring. Install new O-ring on valve cartridge and install cartridge in valve block. Tighten securely. b. Solenoid Replacement. (1)   Loosen screw (3) and remove plug (4) from solenoid (5). (2)   Remove nut (6) and remove solenoid (5) from valve block (2). (3)   Install new solenoid (5) on valve block (2) as shown and install nut (6). (4)   Connect plug (4) to solenoid (5) and tighten screw (3). c. Valve Block Replacement. (1)   Loosen screws (3) and remove plug (4) from solenoid (5). (2)   Tag and disconnect three hoses (7, 8 and 9) and tube (1O) from valve block (2). Plug ends of hoses and tube and parts in block to prevent entry of dirt. (3)   Connect hydraulic tube (1 0) to new valve block (2 (4)   Connect three hydraulic hoses (7, 8 and 9) to valve block (2). (5)   Connect plug (4) to solenoid (5) and tighten screw (3). 4-485

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc.