4-53. #3 and #4 DISCHARGE DRAIN VALVES
This task covers:
Cleaning and Inspection
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
Grease (Item 1, Appendix E)
Dry Cleaning Solvent (Item 3, Appendix E)
O-Rings (Figure 18, Appendix F)
Remove snap ring (1).
Remove knob (2), rod (3), and
plunger (4) as assembly.
Remove two screws (8) and
remove valve body (7) from panel.
Loosen hose clamp (9) and
remove drain hose (10).
Turn valve, (7) until fitting (5)
and hose (6) are free of valve (7).
Remove and discard two O-rings (11).
b. Cleaning and Inspection.
potentially dangerous. Avoid repeated
and prolonged breathing of vapors and
skin contact with the liquid. Do not use
near open flame, arcing equipment or
other ignition sources. Always wear eye
protection and protective clothing. The
flash point of P-D-680 is 100 to 138 deg.
F (38 to 59 deg. C).
Clean all parts in dry cleaning
solvent (Item 3, Appendix E).