Quantcast Mineral Spirits - TM-5-4210-233-14P-1_277

Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: Mineral Spirits
Back | Up | Next

Click here for a printable version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Lowering the Truck - TM-5-4210-233-14P-1_276
Up
TM-5-4210-233-14P-1 Twin Agent 4x4 Firefighting Truck Model No. CM-KFT-B Manual
Next
Solvent Spray Gun - TM-5-4210-233-14P-1_278
TM 5-4210233-14&P-1 4-9.  GENERAL MAINTENANCE PROCEDURES - Continued b. Mineral Spirits. WARNING Mineral  spirits  are  toxic  to  skin,  eyes,  and  lungs.  Skin  and  eye protection   is   required.   Avoid   prolonged   or   repeated   contact. Good, general ventilation is normally adequate. c. Gasoline, Diesel Fuel. WARNING Never use gasoline or diesel fuel to clean parts. d. Freon 113. WARNING All freons are asphyxiants and are toxic to skin and eyes.  Skin and eye protection is required. Use only in a well ventilated area. Freons are used to clean any parts that normally come in direct contact with hydraulic fluid. e. Degreasing Machine. WARNING 1,1,1 Trichloroethane is toxic to skin, eyes and lungs.  Skin and eye protection is required. Avoid prolonged or repeated contact. Good, general ventilation is normally adequate. Heavy   oil   and   grease   may   be   removed   with   a   degreasing machine   filled   with   1,1,1   Trichloroethane.   All   parts   shall   be dipped in rust preventive oil after removal from machine. f. Baking Soda Solution.  Truck battery exterior surfaces, terminals, and cable clamps should be cleaned with a weak solution of baking soda (Item 5, Appendix E) and water. A bristle brush soaked in the solution may be used to remove caked dirt or corrosion products. 4-148

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +