5-74. APU PISTONS, RINGS AND CONNECTING RODS - Continued
Position the connecting rod (2) on the crankshaft, oil the journal and install the rod cap with bearing
half. When installing the rod cap, position so the raised witness mark on the forging matches the
mark on the connecting rod.
Install and tighten the two cap screws (1) to 27-29 ft lbs (37-39 N.m).
Crank the engine over by hand to see that the bearings are free.
Install cylinder head (see para 5-72).
Install camshaft (see para 5-70).
Install governor cup (see para 5-69).
Install gear cover (se para 5-68).
Install flywheel (see para 5-67).
Install oil pan (see para 5-71).
Install APU (see para 4-207).
Replace oil (see para 3-1).