5-43. FORWARD TANDEM AXLE AND DRIVE UNIT-Continued
Place a protector or driver against end of drive pinion. Press the drive pinion (73) through the outer
bearing and helical drive gear assembly. Remove the drive pinion (73) from the bottom of the
Remove outer spacer (74) and inner spacer (75) from carrier. Tag spacers to aid in assembly.
Remove outer bearing cone (76) and helical gear (77) from differential carrier.
Use a hammer and a brass drift and remove outer bearing cup (78) and inner bearing cup (79) from
carrier. Tag and wire shims (80) together to aid in assembly. Measure and record the thickness of
the shim pack.