5-25. WATER PUMP - Continued
(10) Install hose (6) between oil cooler pipe and water pump housing (3). Tighten hose clamps
(11) Install hose (4) between radiator pipe, and water pump housing (3). Tighten hose clamps
(12) Install hose (1) between thermostat cover and water pump housing (3). Tighten hose clamps
(13) Install fuel line bracket (12) with two bolts (11). Replace tie straps as necessary.
g. Follow-on Maintenance.
Connect batteries (see para 4-114).
Refill radiator (see para 3-6), start main engine and check for leaks. Tighten/remake connections
Stop engine after 2 minutes and top up radiator again.
Restart engine and allow it to reach full working temperature. Watch for leaks as pressure builds.
Stop engine if leak is detected and repair.
When engine has run at full operating temperature for 5 minutes shutdown and allow to cool.
Recheck radiator level.