5-16. FUEL PUMP-Continued
Adhesives, solvents, and sealing compounds can
burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-
ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash
immediately with soap and water.
Apply adhesive-sealant (Item 35,
Appendix E) to three screws (6).
Install three screws (6).
Install two fuel hoses (7).
Install thermostat crossover tube (see
Install DDEC Electronic Control Module
(see para 5-28).
Connect batteries (see para 4-114.)