5-16. FUEL PUMP-Continued
Remove fuel pump (3) and gasket (4)
from governor housing (5). Discard
Dry cleaning solvent P-D-680 is potentially
Avoid repeated and prolonged
breathing of vapors and skin contact with the liquid.
Do not use near open flame, arcing equipment or
other ignition sources. Always wear eye protection
and protective clothing. The flash point of P-D-680
is 100 to 138 deg. F (38 to 59 deg. C).
Clean fuel pump (3) with dry cleaning
solvent (Item 3, Appendix E).
Remove fork (1) from fuel pump (2).
Mount fuel pump holder in vise and
install fuel pump.
Mark and remove elbow (3), elbow (4),
coupling (5), and nipple (6).