AERIAL LADDER WATER PIPE ASSEMBLY -706880634

TM 5-4210-233-14&P-1

4-201. AERIAL LADDER WATER PIPE ASSEMBLY

This task covers:

a. Disassembly

c. Assembly

b. Cleaning and Inspection d. Follow-on Maintenance

TOOLS REQUIRED

PERSONNEL REQUIRED: 2

Tool Kit, General Mechanics, Automotive

(Appendix B, Section III, Item 1)

EQUIPMENT CONDITION

Aerial Waterway Drained (see para 2-3 .)

MATERIALS/PARTS REQUIRED

O-Rings (Figure 23, Appendix F)

Wear Pad Cup Seal (Figure 23, Appendix F)

Grease (Item 48, Appendix E)

a. Removal

(1) Fully extend ladder in a horizontal position at the

rear of the truck (see para 2-14).

(2) Support section of pipe (1) that pipe (2) is being

removed from with cable or chain as shown. Allow

several inches of slack in cable so pipe can drop

slightly.

4-505