POWER STEERING RESERVOIR -706880569

TM 5-4210-233-14&P-1

4-162. POWER STEERING RESERVOIR

THIS TASK COVERS:

a. Removal

c. Follow-on Maintenance

b. Installation

TOOLS REQUIRED

EQUIPMENT CONDITION

Tool Kit, General Mechanics, Automotive

Main Engine Shutdown (see para 2-12.)

(Appendix B, Section III, Item 1)

APU Shutdown (see para 2-16.)

Batteries Disconnected (see para 4-114.)

MATERIALS/PARTS REQUIRED

O-ring (Figure 156, Appendix F)

Pipe Sealant (Item 2, Appendix E)

Fluid, Power Steering (Item 21, Appendix E)

Removal.

WARNING

To prevent five hazards, collect residual fluid and clean up any spills immediately

when disassembling power steering components.

CAUTION

Pump or steering gear failure due to contamination may occur unless strict

cleanliness and protective measures are taken when disassembling and

assembling power steering components.

(1) Tag and disconnect hoses (1) and (2). Drain

steering fluid into a suitable container.

Reservoir contains about 6 quarts (5.7 1) of oil.

(2) Remove four bolts (3), four flatwashers (4),

lockwashers (5), and nuts (6) from two

brackets (7).

(3) Remove two screws (8) and two nuts (9)

from brackets (7). Remove reservoir(10).

(4) Remove fittings (1 1 and 12) and O-ring (13)

from reservoir (1 1). Discard O-ring (13).

4-440