Removal -706880495

TM 5-4210-233-14&P-1

4-114. BATTERIES - Continued

(13) If battery fails load test, replace battery.

b. Removal.

NOTE

Steps 1 through 4 show battery disconnection procedure. Use

this procedure whenever disconnecting batteries for truck

maintenance.

WARNING

To avoid serious injury, use proper lifting procedures or use a

suitable lifting device or dolly. Do not drop or tilt batteries.

Batteries contain sulturic acid. Splashing acid can cause

blindness and severe skin burns. Always wear gloves and

protective clothing when working with batteries. If acid contacts

eyes or skin, wash affected area with large amounts of water.

Consult a doctor if splashed in eye or taken internally.

(1) Turn battery switch in cab to OFF.

(2) Unlatch and open battery box cover.

NOTE

Battery box is inside each floor step cab rear

compartment.

Battery A (or Battery 1) is on

passenger side and Battery B (or Battery 2) is on

driver's side.

(3) Loosen nut (1) and remove negative (-) cable

(2) from battery terminal (3).

4-366