 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-233-14&P-1
4-94. CAB INSTRUMENT PANEL SWITCHES-Continued
(2) Remove screws (1) from appropriate panel.
(3) Pull panel forward to access wiring.
(4) Tag and disconnect wiring from back of switch.
(Rock Switch Removal)
(5) Depress clips (2) on switch (3) and push through panel.
(Ignition Switch Removal)
(6) Remove screw (4) and lever (5).
(7) Remove locking nut (6) from switch (7) and push switch (7) through panel.
(Engine Start Switch, Dimmer Switch, Headlight Switch and Wiper Switch Removal)
NOTE
Knob on engine start switch does not need to be removed.
(8) Remove knob (8) from switch (9).
(9) Remove locking nut (10) from switch (9) and push switch (9) through panel.
b. Installation.
(Engine Start Switch, Dimmer Switch, Headlight Switch and Wiper Switch Installation)
(1) Install switch (9) through panel and secure with locking nut (10).
(2) Install knob (8) on switch (9).
(Ignition Switch Installation)
(3) Install switch (7) through panel and secure wth locking nut (6).
i
(4) Install lever (5) and secure with screw (4).
(Rock Switch Installation)
(5) Install switch (3) through front of panel.
(6) Connect wiring to switch as shown in wiring diagram (Appendix H).
(7) Close panel.
(8) Secure panel with screws (1).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
4-335
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals