Quantcast Cleaning and Inspection -706880437

 

Click here to make tpub.com your Home Page

Page Title: Cleaning and Inspection
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
CAB DOORS-continued -706880436
Up
TM-5-4210-233-14-P-1 Firfighting Truck 100 Ft. Aerial Ladder 1000 GPM Manual
Next
Installation -706880438
TM 5-4210-233-14&P-1
4-77. CAB DOORS-Continued
(10)
To remove window regulator (28), remove nut (29) and bolt (30) from horizontal slide track (31).
(11)
Remove two screws (32), lockwashers (33) and nuts (34) securing regulator (28) to bracket (28A)
inside door.
(12)
Remove three screws (35), nuts (36) and washers (37) securing regulator mounting bracket to
edge of door.
(13)
To remove paddle lock (45), remove cotter pin (38), clevis pin (39), two washers (40) and
cable (41).
(14)
Remove nut (42) from striker (43). Remove bracket (44) and paddle lock (45).
(15)
To remove rotary lock (47), remove cotter pin (48), washers (49), clevis pin (50) and two cables
(41 and 13).
(16)
Remove four nuts (51) and screws (52).
(17)
Remove rotary lock (47).
c.
Cleaning and Inspection.
(1)
Clean all internal door parts.
(2)
Inspect window for cracks or damage. If damaged, replace window (see para 4-78).
(3)
Inspect for broken, cracked or corroded parts. If damaged, replace.
(4)
Inspect cables for cuts or fraying. If damaged, replace.
(5)
Apply a light coat of silicone grease (Item 11 Appendix E) to all internal moving parts and the door
latch.
d. Assembly.
(1)
Align rotary lock (47) in door and secure with four nuts (51) and screws (52).
(2)
Attach two cables (41 and 13) to door latch (47) with clevis pin (50), two washers (49) and cotter
pin (48).
(3)
Install paddle lock (45) in door. Install bracket (44) and install nut (42) on striker (43).
(4)
Install cable (41) with clevis pin (39), washers (40), and cotter pin (38).
(5)
To install window regulator bracket (28A), align in door and fasten to door frame edge with three
screws (35), washers (37) and nuts (36).
4-308

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.