AIR BOTTLE RACK AND SLIDE TRAY -706880432

TM 5-4210-233-14&P-1

4-74. AIR BOTTLE RACK AND SLIDE TRAY

This task covers:

a. Removal

c. Follow-on Maintenance

b. Installation

TOOLS REQUIRED

EQUIPMENT CONDITION

Tool Kit, General Mechanics, Automotive

Main Engine Shutdown (see para 2-2 .)

(Appendix B, Section lIl, Item 1) APU Shutdown (see para 2-16 .)

Batteries Disconnected (see para 4-114 .)

a. Removal.

(1) Connect batteries (see para 4-114 .)

(1) Remove two screws (1), two flatwashers

(2), two lockwashers (3) and two nuts (4)

from bottle box (5).

(2) Remove bottle box (5).

(3) Remove the six screws (6), twelve flat

washers (7), six lockwashers (8) and six

hex nuts (9).

(4) Remove slide tray (10) and rails (11).

(5) Remove six screws (12), flatwashers

(13), lockwashers (14), six hex nuts (15),

and slide tray (10) from rails (11).

b. Installation.

(1) Secure rails (11) to compartment floor

with six screws (6), twelve flatwashers

(7), six lockwashers (8) and hex nuts (9).

NOTE

Do not install the center screw on each side at this

time. The bottle box must be in position when

these screws are installed.

(2) Secure slide tray (10) to rails (11) with

six screws (12), flatwashers (13),

lockwashers (14), and hex nuts (15).

(3) Secure bottle box (5) to slide tray (10)

with two screws (1), two flat washers (2),

two lockwashers (3) and two hex nuts (4).

Follow-on Maintenance.

4-303