COMPARTMENT DOOR HOLD-OPEN SPRINGS -706880429

TM 5-4210-233-14&P-1

4-72. COMPARTMENT DOOR HOLD-OPEN SPRINGS

This task covers:

a. Removal

c. Follow-on-Maintenance

b. Installation

TOOLS REQUIRED

EQUIPMENT CONDITION

Tool Kit, General Mechanics, Automotive

Main Engine Shutdown (see para 2-12 .)

(Appendix B, Section III, Item 1) APU Shutdown (see para 2-16 .)

Batteries Disconnected (see para 4-114 .)

a. Removal.

(1) Remove two spring clips (1) and two clevis

pins (2) to remove door arm (2A).

(2) Remove one bolt (3), one lockwasher (4),

and one flat washer (5) from both ends of

rod (6).

(3) Remove rod (6) with spring (7), slide (9)

and spring (8).

b. Installation.

NOTE

Short spring should be installed closest to

door.

(1) Position long spring (7), short spring (8)

and door slide (9) as shown.

(2) Install rod (6) with bolt and secure with one

flat washer (5), one lockwasher (4) and bolt

(3) at each end.

(3) Secure door arm (2A) to door slide (9) and

to body with two clevis pins (2) and spring

clips (1).

Follow-on Maintenance.

(1) Connect batteries (see para 4-114).

4-300