 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-233-14&P-1
4-65. STOP, TURN AND TAIL LIGHTS
This task covers:
a. Disassembly
d. Follow-on Maintenance
b. Cleaning and Inspection
c. Assembly
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section IlI, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
MATERIALS/PARTS REQUIRED
Emery Cloth (Item 25, Appendix E)
a. Disassembly.
(1) Remove four screws (1).
(2) Remove ring (2) with lens (3). Remove
gasket (4). Turn tabs on inside of ring (2)
to separate lens (3) from ring.
(3) Remove three bulbs (5) as needed.
(4) Remove four screws (6).
(5) Disconnect wiring harness from reflector
assembly (7).
(6) Remove reflector assembly (7).
b. Cleaning and Inspection.
(1) Clean lens (3) and reflector (7).
(2) Inspect lens for cracks. If cracked, replace
lens.
(3) Inspect for broken or cracked reflector. If
damaged, replace reflector.
(4) Inspect wiring for fraying or cracked
insulation. If wiring is damaged, contact
Direct Support Maintenance.
(5) Inspect bulb socket, bulb contacts, and
wiring for corrosion. Clean corrosion with
emery cloth (Item 25, Appendix E). If
corrosion is excessive, replace light
assembly.
4-286
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals