TANK FILL AND RECIRCULATING VALVE -706880367

TM 5-4210-233-14&P-1

4-46. TANK FILL AND RECIRCULATING VALVE

This task covers:

a. Removal

d. Assembly

b. Disassembly

e. Installation

c. Cleaning and Inspection f. Follow-on Maintenance

MATERIAL/PARTS REQUIRED:

EQUIPMENT CONDITION

Tool Kit, General Mechanics, Automotive

Main Engine Shutdown (see para 2-12 .)

(Appendix B, Section III, Item 1)

APU Shutdown (see para 2-16 .)

Batteries Disconnected (see para 4-114 .)

MATERIALS/PARTS REQUIRED

All Piping Drained (see para 2-17 .)

Dry Cleaning Solvent (Item 3, Appendix E)

Grease, Silicone (Item 11, Appendix E)

Repair Kit (Figure 12, Appendix F)

a. Removal

(1) Remove 4 screws (1) from foam tank

compartment grate (2); remove grate.

(2) Locate tank fill and recirculating valve

by operating handle on streetside

operator's panel.

(3) Remove cotter pin (3) and retaining pin (4).

4-238