 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-233-14&P-1
4-34. OPERATING RODS
This task covers:
a. Removal
c. Follow-on Maintenance
b. Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
a. Removal.
(1) Remove roll pin (1) and remove T-handle (2).
(2) Remove valve rod guide (3).
(3) Remove cotter pin (4) and clevis pin (5)
from valve arm (6).
(4) Remove lock nut (7).
(5) Remove rods (8 and 9).
(6) Loosen allen head screw (1 0).
(7) Remove swivel block (11).
(8) Remove clevis (12) from rod (8).
b.
Installation.
(1) Install swivel block (11) on rod (9) and secure
with allen head screw (10).
(2) Thread clevis (12) onto rod (8).
(3) Position rod (9) through hole in panel.
(4) Secure rod (8) to swivel block (11) with
locknut (7).
(5) Align clevis (12) with valve arm ( 6) and secure
with clevis pin (5) and cotter pin (4).
(6) Install valve rod guide (3).
(7) Secure T-handle (2) to rod (8) with roll pin (1).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
4-202
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals