Quantcast Removal of FUEL and VOLTS gauges -706880300

 

Click here to make tpub.com your Home Page

Page Title: Removal of FUEL and VOLTS gauges
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
GAUGES-ENGINE STATUS -706880299
Up
TM-5-4210-233-14-P-1 Firfighting Truck 100 Ft. Aerial Ladder 1000 GPM Manual
Next
nstallation of WATER TEMP, OIL TEMP and OIL PRESS gauges
TM 5-4210-233-14&P-1
4-18. GAUGES - ENGINE STATUS - Continued
c.
Removal of FUEL and VOLTS gauges.
(1) Remove gauge panel (see para a. above).
(2) Tag and disconnect wires from back of gauge (1).
Remove nuts (2) and washers (3) as necessary to
remove wires.
(3) Carefully pull bulb socket (4) from back of gauge (1).
Replace bulb (5) in bulb socket (4) if necessary.
(4) Remove two nuts (6) and lockwashers (7) securing
bracket (8) to back of gauge (1).  Remove gauge
through front of panel.
d.
Installation of FUEL and VOLTS gauges.
(1) Install gauge (1) through front of gauge panel.
(2) Install bracket (8) and secure with two lockwashers
(7) and nuts (6).
(3) Connect wires to back of gauge (1) and install
lockwashers (3) and nuts (2) as necessary to secure
wires.
(4) Install bulb socket (4) with bulb (5) in back of gauge
(1) by pressing it firmly into place.
(5) Install gauge panel (see para b. above).
(6) Start truck engine and check gauge operation. Turn
PANEL LIGHTS switch ON at gauge panel and check
that gauge illuminates.
e.
Removal of WATER TEMP, OIL TEMP and OIL PRESS
gauge.
(1) Remove gauge panel (see para a. above).
(2) Carefully pull bulb socket (2) from back of gauge (1).
Replace bulb (3) in bulb socket (2) if necessary.
(3) Disconnect pressure line (4) from back of gauge (1).
(4) Remove two nuts (5) and lockwashers (6) securing
bracket (7) to back of gauge.  Remove gauge (1)
through front of gauge panel.
4-171

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +