Quantcast CROSSLAY HOSE BIN DIVIDERS -706880296

 

Click here to make tpub.com your Home Page

Page Title: CROSSLAY HOSE BIN DIVIDERS
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
STEP LIGHTS -706880295
Up
TM-5-4210-233-14-P-1 Firfighting Truck 100 Ft. Aerial Ladder 1000 GPM Manual
Next
CROSSLAY HOSE BIN ROLLERS -706880297
TM 5-4210-233-14&P-1
4-15. CROSSLAY HOSE BIN DIVIDERS
This task covers:
a.
Replace Front Divider
c.
Replace Bed Floor
b.
Replace Rear Divider
TOOLS REQUIRED:
Tool Kit, General Mechanics, Automotive
(Appendix B, Section lll, Item 1)
a.
Replace Front Divider.
(1) Remove from top: two acorn nuts (1) with attached
rods (2), flatwashers (3), and tubing (4) with attached
plastic bearings (5).
(2) Remove five screws (6), with flatwashers (11),
lockwashers (12), and nuts (13) from bottom flange
and remove front divider (7).
(3) Install front divider (7), align bottom flange, and install
with  five  screws  (6),  with  flatwasher  (11),
lockwashers (12), and nuts (13).
(4) Install rods (2), with attached flatwashers (3) and nuts
(1), and tubing with plastic bearing (5).
(5) Install assembly in place with acorn nuts (1).
b.
Replace Rear Divider.
(1) Remove from top: two acorn nuts (1) with attached
rods (2), flatwashers (3), and tubing (4) with attached
plastic bearings (5).
(2) Remove two screws (8), with flatwashers (14),
lockwashers (15), and nuts (16) from each end of
bottom flange and remove rear divider (9).
(3) Install rear divider (9) and install with two screws (8),
with flatwashers (14), lockwashers (15), and nuts (16)
on each end of bottom flange.
(4) Install rods (2), with attached flatwashers (3) and nuts
(1), and tubing with plastic bearing (5).
c.
Replace Bed Floor.
(1) Remove front divider (see para a. above).
(2) Remove rear divider (see para b. above).
(3) Lift bed floor (10) from truck.
(4) Install bed floor (10) in location.
(5) Install rear divider (see para b. above).
(6) Install front divider (see para a. above).
4-167

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.