 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-233-14&P-1
4-12. PUMP PANEL LIGHTS
This task covers:
a.
Disassembly
c.
Installation
b.
Cleaning and Inspection
d.
Follow-on Maintenance
TOOLS REQUIRED:
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section lll, Item 1)
APU Shutdown (see para 2-16.)
Batteries Disconnected (see para 4-114 .)
MATERIALS/PARTS REQUIRED
Emery Cloth (Item 25, Appendix E)
a.
Disassembly.
NOTE
The pump panel lights are located above the
pump panel on the drivers side of the truck. (1)
Remove two screws (1) and lens (2).
(2) Remove four screws (3) and nuts (4) from tight base
assembly (5).
(3) Tag and disconnect wires.
(4) Remove light base assembly (5) from pump panel
shield (6).
b.
Cleaning and Inspection.
(1) Clean lens and reflector.
(2) Inspect lens for cracks. If cracked, replace lens.
(3) Inspect for broken or cracked reflector. If damaged,
replace light base assembly.
(4) Inspect wiring for fraying or cracked insulation. If
wiring is damaged contact Direct Support
Maintenance.
(5) Inspect bulb socket, bulb contacts and wiring for
corrosion. Clean corrosion with emery cloth (Item 25,
Appendix E).
If corrosion cannot be removed,
replace light base assembly.
4-162
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals