Table 3-3. Operator Troubleshooting-continued -706880118

TM 5-4210-233-14&P-1

Table 3-3. Operator Troubleshooting - Continued

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

ENGINE - Continued

ENGINE CRANKS BUT WILL NOT START

Check fuel gauge for low fuel level.

Fill fuel tank as required.

ENGINE IS DIFFICULT TO START

Step 1. Check battery switch set to Position 1, 2 or BOTH.

Set battery switch to Position 1, 2 or BOTH.

Step 2. Check fuel grade.

Drain and refill tank with correct fuel.

Step 3. Check for water in fuel.

Change fuel filters.

ENGINE STARTS THEN STOPS

Step 1. Check fuel gauge for low fuel level.

Fill tank as required.

Step 2. Check fuel grade.

Drain fuel tank and refill with correct fuel.

Step 3. Check fuel lines for crimping or leaks.

Refer to Unit Maintenance for repair.

3-18