Quantcast Engaging PTO -706880083

 

Click here to make tpub.com your Home Page

Page Title: Engaging PTO
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Locating the Truck
Up
TM-5-4210-233-14-P-1 Firfighting Truck 100 Ft. Aerial Ladder 1000 GPM Manual
Next
Setting Outriggers-continued
TM 5-4210-233-14&P-1
2-14. AERIAL LADDER SET-UP - Continued
(7) Do not set outriggers on or near manhole covers,
storm sewers, etc.
(8) Avoid overhead obstructions (cables, structures, etc.).
c. Engaging PTO.
(1) Shift the transmission into N (neutral).
(2) Set the PARKING BRAKE (pull up).
(3) Block the front wheels in both directions.
(4) Activate the AERIAL MASTER switch.
(5) Activate the AERIAL PTO switch.
d. Setting Outriggers.  The outrigger control panels and
aerial control panel are located at the rear of the truck.
(1) Open aerial/outrigger control panel door.
(2) Set DIVERTER VALVE OUTRIGGER/AERIAL switch
to OUTRIGGER position For safety reasons, the
outrigger hydraulic functions and the ladder hydraulic
functions cannot be operated at the same time.
NOTE
For safety reasons, the outrigger hydraulic
functions and the ladder hydraulic functions
cannot be operated at the same time.
(3) Activate engine HIGH IDLE switch.
(4) Open outrigger control panel doors.
WARNING
Be sure area around truck is clear of all
personnel
before
extending
outriggers.
Crushing injury may result.
(5) Fully extend front and rear outriggers.
2-55

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +