Table 2-1. Operator PMCS Procedures -Continued
Equipment Is Not
No. A D W
ITEM TO BE INSPECTED/Procedures
Check transmission for leaks, smooth shifting. Report
- Any range is not
any deficiencies to Unit Maintenance.
Tlres and Rims
Check pressure of all tires; 120 psi (823 kPa) front, - Pressure low.
I10 psi (754 kPa) rear.
Check each tire for large objects in tread, remove.
Check for deep cuts, uneven wear, or signs of tread
- Deep cuts or tread
Report any deficiencies to Unit Maintenance.
Check for oil leaks on all hoses and fittings between
- Large oil leaks or hose
reservoir and pump in engine compartment and
steering gear (left hand wheel).
Check steering column and miter box for grease
Check, while operating thevehicle and turning the
- Failed universal joints or
steering wheel lock-to-lock, that the steering is free
turning and even.
Check for oil leaks. Report any leak to Unit