Table 2-1. Operator PMCS Procedures -Continued
Equipment Is Not
No. A D W
ITEM TO BE INSPECTED/Procedures
CAB ASSEMBLY, LIGHTS AND CONTROLS -
Check operation of air horns. Be sure pressure in air
reservoir is sufficient for proper operation.
Cab Exterior Trim and Scuff Plates
Check missing or damaged trim and scuff plates. Be
sure attaching hardware is in place.
Cab Instrument Panel Gauges, Swltches, Indlcator
Check gauges operate. Check for visible damage to
- Any gauges, switches or
gauges, switches, or indicator lights. Check switches
indicator lights are
for proper operation. Be sure indicator lamps
Dashboard Compartment Doors
Be sure compartment door latches work properly.
Clean glove compartment. Check for loose or missing
Transmlssion Shift Control
Check operation of shift unit with main engine
- Any range is not
running. All gear ranges should be selectable and
movement of handle should be free and smooth. Be
sure truck will not start unless seiected to Neutral.
With main engine running, set HI/LO/OFF switch to
HI. Set HEATER and DEFROST levers to MAX.
Check for adequate hot air tlow.