Table 2-1. Operator PMCS Procedures -Continued
Equipment Is Not
No. A D W
ITEM TO BE INSPECTED/Procedures
HOSE BODY ASSEMBLY - Contlnued
Rear Roll-Up Door
Check that rear roll-up door operates smoothly,
Check compartment to see that equipment is stowed
- Equipment stowing
correctly and fixtures are in place.
fixtures missing or
Inspect ladder keeper door for missing attaching
- Ladder keeper door
hardware or looseness. Report loose keeper door or
missing or will not latch
missing attaching hardware to Unit Maintenance.
Air Bottle Rack and Slide Tray
Check that locking pin and locking pin retainer chain
are in place.
Check that slide tray works smoothly, and slide locks
Inspect air bottle rack for visible damage.
Report any deficiencies to Unit Maintenance.
CAB ASSEMBLY, LIGHTS AND CONTROLS
Cab Roof Panel
Check that attaching hardware is in place, panel is
- Attaching hardware
not severely bent, scratched, or damaged. Check
inside of cab for signs of water leakage.
Ensure both cab doors latch. Check inner and outer
- Cab door will not latch.
Be sure door seals are in place.