Table 2-1. Operator PMCS Procedures
Equipment Is Not
No. A D W
ITEM TO BE INSPECTED/Procedures
Set pump panel light switch to on position.
Check that pump panel lights illuminate. Check that
following gauge back lights illuminate:
TRANSMISSION OIL TEMPERATURE
Check that each compartment light illuminates.
Check that each step light illuminates.
Hose Bin Rollers, Dividers
Confirm rollers move freely. Check dividers for
Inspect gauge for visible damage. Check that all
- Any gauge is damaged
segments of water tank level gauge illuminate when
water tank is full.
Pump Panel Lights, Switches
Inspect for visible damage. Check that rubber toggle
- Any switch is damaged
switch boots are in place, free of cracksldamage.
Pump Panel Throttle Control
Inspect for visible damage.
With water pump operating, turn relief valve to ON
position. Increase and/or decrease setting and check
that OPEN and CLOSED lights illuminate. If lights do
not illuminate, notify Unit Maintenance to troubleshoot.