|
| |
ENGINE DIVISION SERVICE MANUAL
TM 5-4210-230-14&P-1
ENGINE
19.
Use SE-2420 Puller and wrench to remove power
steering pulley, Figure 23.
Fig. 23 Using SE-2420 Puller to Remove Power Steering
Pump Pulley
1. Pulley
2. Puller
20.
Remove bolts and flat washers securing power steering
pump to bracket, Figure 24. Remove adjusting strap
bolt and remove power steering pump with side
bracket.
Fig. 24 Removing Power Steering Pump
1. Side bracket
2. Pump
3. Bolts
4. Adjusting Strap
5. Adjusting Bolt
21.
Remove power steering bracket with adjusting strap,
Figure 25.
Fig. 25 Removing Power Steering Bracket and Strap
1. Adjusting strap
2. Bracket
3. Bolts
22.
Remove starting motor bolts and lockwashers, Figure
26. Remove starting motor.
Fig. 26 Starting Motor Removal
1. Starting motor
2. Bolts
CGES-210 Page 14
PRINTED IN UNITED STATES OF AMERICA
|
