5-20. COMPRESSOR REPAIR (Continued).
Do not attempt to force any components during
assembly. Investigate the problem if assembly
is not smooth and force free.
Coatwear surfaces with engine oil (Appendix D,
Item 37) before reassembling.
Install bearing (36) and cap (35) by installing
four bolts (34).
Install piston rings (32 and 33) using a ring
Insert buttons (31) and carefully insert piston
(30) and connecting rod (28) into the crank-
With crankshaft positioned at the bottom of its
stroke, install cap (28) to rod (29) using bolts
Install gasket (26) and cylinder block (2) onto
the crankcase (1) using four bolts (24) and lock-
Install copper washer (23), spring (22), and
Install inlet valve cage (20) using a 3/4 inch allen
Install copper washer (1 9), spring (1 8) and valve