|
| |
TM5-4210-229-14&P
5-14.
ENGINE MOUNTING REPLACEMENT.(Continued).
(7)
Remove crossmember mounting brackets
(12) from frame rails by removing eight nuts
(13) and bolts (14).
(8)
Remove front engine mounting bracket (15)
from engine by removing four bolts (16) and
washers (17).
b.
Rear engine mounting assembly.
(1)
Support the rear of the engine with a suitable
jack to relieve the weight on the rear
mountings.
(2)
Remove nuts (18), washers (19) and bolts
(20).
(3)
Remove each rear engine bracket (21) from
engine by removing four bolts (22) and
washers (23).
(4)
Remove rear engine mounting insulators (24)
by prying from rear engine mounting frame
bracket (25).
(5)
Remove rear engine mounting frame bracket
(25) by removing four nuts (26) and bolts (27).
INSTALLATION
a. Front engine mounting assembly.
(1)
Install front engine mounting bracket (12) to
engine using four bolts (16) and washers (17).
Torque bolts (16) to 28 ft-lb (38 N.m).
(2)
Install crossmember mounting brackets (12)
to frame rails using eight nuts (13) and bolts
(14). Torque nuts (13) to 70 ft-lb (95 N.m).
(3)
Install front engine mounting crossmember (9)
using light locknuts (10) and bolts (11).
Torque locknuts (10) to 70 ft-lb (95 N.m).
(4)
Position insulator (7) and retainer (8) and
carefully lower engine until spacers (6) can be
inserted.
(5)
Install two spacers (6), engine insulator (5),
retainer (4), two washers (3), bolts (2) and
locknuts (1). Lower front of engine and
remove front engine jack. Torque locknuts (1)
to 38 ft-lb (48 N.m).
b.
Rear engine mounting assembly.
(1)
Install the mounting frame bracket (25) using
four bolts (27) and nuts (26). Torque nuts (26)
to 70 ft-lb (95 N.m).
(2)
Insert insulator (24) in bracket (25).
(3)
Install rear engine bracket (21) to engine using
four bolts (22) and washers (23). Torque bolts
(22) to 65 ft-lb (88 N.m).
(4)
Carefully lower engine until bolts (20) can be
inserted.
(5)
Install washers (19) and nuts (18). Torque
nuts (18) to 36 ft-lb (48 N.m).
5-37
|
