4-157. TRANSMISSION SHIFT CONTROL LEVER REPLACEMENT.
This task covers: a. Removal
General Mechanics Tool Kit
Shift Control Lever (505641C1)
General Safety Instructions
Transmission in (N) neutral.
Parking brake set.
a. Remove two bolts (1) nuts (2) and lockwashers (3)
which secure shift lever assembly to support angle
b. Remove two nuts (5), lockwashers (6) and bolts (7)
which secure shift lever assembly to dash panel (8).
c. Lower shift lever assembly from dash and remove two
nuts (9), lockwashers (10), bolts (11) and one
d. Move shift lever slowly up and down until barrel on
cable end (13), is positioned in access notch,
remove cable end from shift lever assembly.
a. Move shift lever slowly up and down until barrel on
cable end (13) can be positioned in access notch.
b. Position cable along bracket (14) as required for proper
shifting and secure by installing U-clamp (12), two bolts
(11), lockwashers (l 0) and nuts (9).
c. Position shift lever assembly at dash panel (8) and
secure by installing two bolts (7), lockwashers (6) and
d. Attach support angle (4) using two bolts (1), nuts (2),
and lockwashers (3).