|
| |
TM 5-4210-229-14&P
4-124. HOOD ASSEMBLY REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SET-UP
Tools
General Mechanics Tool Kit
Materials/Parts
Hood (487787C3)
Equipment Condition
Para. Condition Description
4-122 Brush Guard Removed
General Safety Instructions
Engine OFF.
Transmission in (N) neutral.
Parking brake set.
Personnel Required: 2
REMOVAL
a. Release hood latches (1) on each side of cowl
and tilt hood assembly forward.
b. Remove cable end pins (2) and detach stop
cables (3) from hood stop brackets (4) at top of
radiator.
c. Disconnect headlight wiring harness from hood
assembly.
d. Remove cotter pin and hinge pin (5) from the two
hood hinge assemblies (6) and detach hood (7)
from chassis.
e. Remove spring type pin and hinge pin (5) from
the two hood hinge assemblies (6) and detach
hood (7) from chassis.
INSTALLATION
a. Position hood (7) onto chassis and secure with
spring type pin and hinge pin (5) to two hood
hinge assemblies (6).
b. Connect headlight wiring harness to connector on
underside of hood.
c. Attach stop cables (3) to hood stop brackets (4)
at top of radiator using cable end pins (2).
d. Close hood assembly and connect hood latches
(1) on each side of cowl.
e. Install brush guard (paragraph 4-122).
4-136
|
