4-100. ROOF WARNING LIGHT MAINTENANCE (Continued
Slide locking ring (4) counterclockwise
and remove ring (4) and red lens cover
Remove two lamp retaining clips (6).
Remove control wiring connectors (7).
Replace two lamps (8).
Install control wiring connectors (7).
Install two lamp retaining clips (6).
Install red lens cover (5) and locking
ring (4) and turn clockwise to lock.
Replace any other parts which are defective.
Place roof warning light (3) onto speaker
bracket (2) and secure with two screws (1).
Plug in positive wire and attach ground wire at
rear of speaker.
Install wires into protective covering and se-
cure with new nylon tie.