4-95. FRONT CLEARANCE LIGHT MAINTENANCE
This task covers:
General Mechanics Tool Kit
Clearance Light Assembly (451677C92)
General Safety Instructions
Transmission in (N) neutral.
Parking brake set.
Remove two light mounting screws (1). Re-
move trim bezel (2) and seal (3).
Pry light assembly (4) from mounting recess in
Turn bulb socket (5) about one-eighth turn
counterclockwise and remove socket (5) (with
bulb) from light assembly (4).
Grasp bulb (6) and pull straight out to remove
plug-in type bulb from socket (5).
Inspect light assembly (4) and gasket (3) and
replace if damaged.
Push new bulb (6) into socket(5).
Position socket (5) (with bulb) into light assem-
bly (4) and turn socket one-eighth turn clock-
wise to secure.
Position light assembly (4), seal (3) and trim
bezel (2) into mounting recess in cab. Secure
with two mounting screws (1).
Connect battery cables.
Check light operation.