4-83. BATTERY REPLACEMENT (continued)
Install the battery (6) into the battery box (7)
Install the battery hold-down retainer (5), bolts
(3), and locknuts (4).
Connect the positive cables to the positive
Connect the negative cables to the negative
Torque the terminals to 120 ft-lb (13 N.m).
Install cover (2) and connect retainer (1).
4-84. BATTERY CABLE REPLACEMENT
This task covers:
General Mechanics Tool Kit
Battery Cables (123-00045)
General Safety Instructions
The battery produces hydrogen gas. Do not smoke or
cause a flame or spark to occur near the battery as it may
cause the gas to ignite and explode.
Transmission in (N) neutral.
Parking brake set.
Disconnect the negative cables from the
negative battery terminals.
Disconnect the positive cables.
Remove four screws from mounting on battery
Tip battery selector switch front and disconnect
positive cables from selector switch.
Disconnect negative cables from frame.
Remove battery cables.
Install negative battery cables and attach to
Attach positive cables to battery selector
Position selector switch and secure with four
Connect positive and negative cables to proper