4-66. RADIATOR REPLACEMENT (Continued).
Insert catch basin under radiator and disconnect two transmission cooling lines (1)from bottom of radiator.
Remove front support rod (2) by removing two bolts (3) and washers (4).
Remove ten bolts (5) and flat washers (6) securing radiator (7) to radiator support (8).
Remove radiator (7).
Install radiator (7) and secure to radiator support (8) using ten bolts (5) and flat washers (6).
Install four support rods (2) and secure with bolts (3) and washers (4).
Connect two transmission cooling lines (1) to bottom of radiator.
Install hoses (paragraph 4-63).
Install fan shroud (paragraph 4-60).
Fill cooling system (paragraph 4-58).
Check transmission fluid level (paragraph 4-156).