4-54. BACK-UP ALARM REPLACEMENT
This task covers:
General Safety Instructions
General Mechanics Tool Kit
Battery Selector Switch OFF.
Compartment Light (M393)
Remove two screws (1) securing lens (2) to light
Remove lens (2).
Remove two screws (3), washers (4), and nuts (5)
securing light assembly to vehicle compartment.
Disconnect wiring to light assembly.
Remove housing (6) and gasket (7).
Remove old bulb (8) by pressing inward and rotat-
ing counterclockwise 90 degrees.
Install new bulb (8) by pressing inward and rotating
clockwise 90 degrees.
Install light assembly housing (6) and gasket (7) to
Connect wiring to light assembly.
Secure light assembly with two screws (3), washers
(4) and nuts (5).
Install lens (2) with two retaining screws (1).
Reconnect battery cables.