4-53. TURN AND STOP LIGHT MAINTENANCE.
This task covers:
General Safety Instructions
General Mechanics Tool Kit
Battery Selector Switch OFF.
Turn and Stop Light (CE-650-ST)
Remove five screws (1) retaining lens cover (2)
and gasket (3) to mounting base (4).
Remove three nuts (5), starwashers (6), and
screws (7) retaining mounting base (4) to fire body.
Disconnect two plugs.
Repair consists of replacement of damaged parts or
burnt out sealed beam lamp.
Connect two plugs.
Install mounting base (4) to fire body and secure
with screws (7), starwashers (6) and nuts (5).
Install gasket (3) and lens cover (2) onto mounting
base (4) and secure with five screws (1).
Connect battery cables.