REAR RETAINER OIL SEAL REPLACEMENT.

TM 5-4210-224-14&P

6-20. REAR RETAINER OIL SEAL REPLACEMENT.

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General Mechanics Tool Kit

Materials/Parts

Rear Retainer Seal Installer

Rear Retainer Seal (260236)

J-22834

Transmission Fluid (Appendix D, Item 32)

Jack

Sealant

Jack Stand

General Safety Instructions

Equipment Condition

Engine OFF

Para. Condition Description

Transmission in (N) neutral.

Parking brake and micro-brakelock set.

4-186 Propeller Shaft Removed

REMOVAL

a. Raise the vehicle.

b. Remove the oil fill plug (1).

c. Remove the drain plug (2) and catch the oil in a

suitable pan.

Disconnect the propeller shaft at the transfer

case and tie up, away from work area.

e. Disconnect the speedometer cable (3).

Remove bearing retainer (9) and gasket (10),

discarding gasket.

f. Remove speedometer driven gear (5) and seal

j. Scrape all gasket material from the retainer and

case.

g. Using a flange or yoke holding tool, remove the

output yoke or companion flange nut (6) by

k. Remove and discard oil seal (11).

pulling the output yoke (7) and flange nut off the

main shaft.

Support the transmission with a jack while

removing mounting bolts and bearing retainer

bolts

(8).

6-48