6-19. TRANSMISSION REPAIR. (Continued)
Install mainshaft rear bearing locknut (1)
Slide speedometer drive gear (4) over
and washer (68) using mainshaft bearing
mainshaft (5) to bearing (20).
(d) Tighten mainshaft rear bearing locknut (1)
(14) Install rear bearing retainer (2) with new gasket
and bend washer tangs to slot in nut.
(a) Ensure snap ring ends are in lubrication slot
Install parking brake drum and /or universal
and cut out in bearing retainer (2).
joint flange (69).
Install bots (67) and torque the upper
retainer bolts to 20 ft-lbs (27 NĚ ) and the
(16) Lock transmission in two gears at once. Install
lower retainer bolts to 30 ft-lbs (40 NĚ ).
universal joint flange locknut (70) and tighten.